Zentrum für Optische Technologien (ZOT)

Cunha, F.F., Blüml, V., Zopf, L.M., Walter, A.*, et al., "Lossy Image in a Preclinical Multomodal Imaging Study", J Digit Imaging (2023) – *Corresponding Author, https://doi.org/10.1007/s10278-023-00800-5

D. Bharti, H. Srinivas, F. Shobeiry, K.R. Hamilton, R. Moshammer, T. Pfeifer, K. Bartschat, A. Harth, „Multisideband interference structures observed via high-order photon-induced continuum- continuum transitions in argon,“ Physical Review A 107 (2), 022801 (2023), https://doi.org/10.1103/PhysRevA.107.022801

F. Shobeiry, D. Bharti, P. Fross, H. Srinivas, E. Brunner, A. Buchleitner, K. Hamilton, K. Bartschat, T. Pfeifer, R. Moshammer, A. Harth, “Sub-femtosecond dynamics in photoionization and photodissociation processes,” Proc. SPIE 12411, Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XXIII, 1241107 (2023); https://doi.org/10.1117/12.2648439

Y. Schrödel, C. Hartmann, T. Lang, J. Zheng, M. Steudel, M. Rutsch, S. H. Salman, M. Kellert, M. Pergament, T.Hahn-Jose, S. Suppelt, J. H. Dörsam, A. Harth, W. P. Leemans, F. X. Kärtner, I. Hartl, M. Kupnik, C. M. Heyl,“ Acousto-Optic Modulation in Ambient Air,“ arXiv:2304.06579  (2023)

Farshad Shobeiry, Patrick Fross, Hemkumar Srinivas, Thomas Pfeifer, Robert Moshammer, Anne Harth, "Sub-femtosecond optical control of entangled states" arXiv:2110.06668  [quant-ph]

Praschl, C., Zopf, L.M., Kiemeyer, E., Langthallner, I., et int, Walter, A.. (2023) U-Net based vessel segmentation for murine brains with small micro-magnetic resonance imaging reference datasets. PLoS ONE 18(10): e0291946. https://doi.org/10.1371/journal.pone.0291946

McLaren, M., Conners, R., Isupov, M.N., Gil-Diez, P., Gambell, L., Gold, V., Walter, A. et al. CryoEM reveals that ribosomes in microsporidian spores are locked in a dimeric hibernating state. Nat Microbiol 8, 1834–1845 (2023). https://doi.org/10.1038/s41564-023-01469-w

Cunha, F.F., Blüml, V., Zopf, L.M., Walter, A.*, et al., "Lossy Image in a Preclinical Multomodal Imaging Study", J Digit Imaging (2023) – *Corresponding Author, https://doi.org/10.1007/s10278-023-00800-5

V. Richter, M. Rank, A. Heinrich, H. Schneckenburger, "Novel Approaches in 3D Live Cell Microscopy", Quantum Electronics, Vol. 52, Issue 1, 2022, S. 17-21, DOI: 10.1070/QEL17961

M. Schneckenburger, S. Höfler, L. Garcia, R. Almeida, R. Börret, "Material Removal Predictions in the Robot Glass Polishing Process Using Machine Learning", SN Applied Sciences, Vol. 4, Issue 1, Art.-No. 33, 2022, S. 14, DOI: 10.1007/s42452-021-04916-7

M. Schneckenburger, R. Almeida, S. Höfler, R. Börret, "Material removal by slurry erosion in the robot polishing of optics by polishing slurry nozzles" Wear, Vol. 494-495, Art.-No. 204257, 2022, S. 7, DOI: 10.1016/j.wear.2022.204257

C. Eder, A. Heinrich, "First steps into coherent object classification using convolutional deep diffractive neural networks", TM – Technisches Messen, Vol. 89, Issue 6, 2022, S. 421-429, DOI: 10.1515/teme-2021-0128

A. Sigel, A. Heinrich, "Verzeichnungskorrektur einer omnidirektionalen Kamera durch 3D-Referenzobjekte", TM-Technisches Messen, Vol. 89, Issue 11, 2022, S. 12, DOI: 10.1515/teme-2022-0067

L. Garcia, U. Bielke, C Neumann, T. Hageney, K. Banzhaf, E. Wiedenmann, R. Börret, "Online position correction approach of an industrial robot by using a new photogrammetric measurement system", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2022, S. 11, DOI: 10.1177/09544054221131156

Z. Pan, D. Xu, L. Dreyer, M. Dohmen, A. Heinrich, W. Schulz, H.-D. Junker, "Bildgebende MALDI-MS und Nanodispensing als Werkzeuge für die wirkungs- bezogene HPTLC-Analytik" Mitteilungen der Fachgruppe Umweltchemie und Ökotoxikologie, Gesellschaft Deutscher Chemiker, Vol. 28, Issue 3, 2022, S. 93-97, Standortnachweis: https://www.gdch.de/fileadmin/downloads/Netzwerk_und_Strukturen/Fachgruppen/Umweltchemie_ Oekotoxikologie/mblatt/2022/heft322.pdf

M. Dohmen, A. Sigel, A. Heinrich, "Additive Fertigung einer katadioptrischen Panoramalinse", Jahrbuch der Optik und Feinmechanik, Dr. Wolf-Dieter Prenzel (Hrsg.), Vol. 67, 2022, S. 15-32, ISBN: 978-3-00-072263-9, Optik Verlag

M. Rank, A. Heinrich, "Locally and temporally resolved image-based determination of the refractive index distribution during additive manufacturing of optical components", Tagungsband zur Veranstaltung „Forum Bildverarbeitung 2022“ vom 24. - 25.11.2022, Karlsruhe, Längle, T. und Heizmann, M. (Hrsg.), 2022, S. 215-226, ISSN: 2510-7224, ISBN: 978-3-7315-1237-0, DOI: 10.5445/KSP/1000150865, Seiten: 215-226, Standortnachweis: https://www.ksp.kit.edu/site/books/e/10.5445/KSP/1000150865/

M. Rosner, A. Heinrich, "Addtive Fertigung eines Random Lasers", Proceedings 123. DGaO Tagung 2022, Pforzheim, 2022, S. 2, ISSN: 1614-8436, Standortnachweis: https://www.dgao-proceedings.de/abstract/abstract_only.php?id=2811

A. Wolff, Y. Bauckhage, A. Heinrich, J. K. N. Lindner, "Directed Self-Assembly of Polystyrene Nanosphere Lithography Masks Using Additively Printed Templates", Tagungsband zur "14th International Conference on Physics of Advanced Materials" 2022, S. 2

L. Garcia, U. Bielke, C. Neumann, T. Hageney, K. Banzhaf, E. Wiedenmann, R. Börret, "Machine Learning Ansatz zur Bestimmung der Target-Position eines optischen Messgeräts", Photogrammetrie - Laserscanning - Optische 3D-Messtechnik, Beiträge der Oldenburger 3D-Tage 2022, S.12, Luhmann, T.; Schumacher, C. (Eds.), Wichmann Verlag, ISBN: 978-3-87907-726-7, Standortnachweis (nur die ersten 6 Seiten enthalten): https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjBnrPLwvf8AhX1g_0HHcFCBOQQFno ECBsQAQ&url=https%3A%2F%2Fwww.vde-verlag.de%2Fbuecher%2Fleseprobe%2F9783879077267_PROBE_01.pdf&usg=AOvVaw3I-p7-fYFCRSbyrpuJCSNd

U. Bielke, L. Garcia, D. K. Harrison, T. Hageney, K. Banzhaf, E. Wiedenmann, R. Börret, "Entwicklung einer Simulationsmethodik für das Multi-Aperture-Positioning-System", Photogrammetrie - Laserscanning - Optische 3D-Messtechnik, Beiträge der Oldenburger 3D-Tage 2022, S.14, Luhmann, T.; Schumacher, C. (Eds.), Wichmann Verlag, ISBN 978-3-87907-726-7

L. Garcia, U. Bielke, T. Hageney, K. Banzhaf, E. Wiedenmann, R. Börret, "Machine Learning approach to predict the position of a new online position measurement system’s target", Proceedings of the 22nd international conference of the european society for precision engineering and nanotechnology, 30.05.-03.06.2022, Geneva, Switzerland, S. 4, R.K. Leach (Eds.), euspen Verlag, Northampton, UK, ISBN: 978-1-9989991-1-8

U. Bielke, L. Garcia, D. K. Harrison, T. Hageney, K. Banzhaf, E. Wiedenmann, R. Börret, "Simulation and accuracy evaluation of a new 3D photogrammetric position measurement system", Proceedings of the 22nd international conference of the european society for precision engineering and nanotechnology, 30.05.-03.06.2022, Geneva, Switzerland, S.4, R.K. Leach (Eds.), euspen Verlag, Northampton, UK, ISBN: 978-1-9989991-1-8

S. Höfler, M. Schneckenburger, M. Brohmann, D. K. Harrison, F.-J. Stickel, K. Aziz-Lange, R. Börret, R. "Study of the temperature behaviour in the polishing gap for different combinations of polishing pads and slurries", Proceedings of the 22nd international conference of the european society for precision engineering and nanotechnology, 30.05.-03.06.2022, Geneva, Switzerland, S. 4, R.K. Leach (Eds.), euspen Verlag, Northampton, UK, ISBN: 978-1-9989991-1-8

M. Schneckenburger, "Machine learning Modell für die Abtragsvorhersage in der Roboter-Glaskeramik-Politur", Dissertation, TU Illmenau, 18.08.2022, ISBN: 978-3-86360-259-8, DOI: 10.22032/dbt.52077, Standortnachweis: https://www.db-thueringen.de/receive/dbt_mods_00052077; https://d-nb.info/1266491147

H. Srinivas, F. Shobeiry, D. Bharti, T. Pfeifer, R. Moshammer, A. Harth, „High-repetition rate attosecond beamline for multi-particle coincidence experiments,“ Optics Express 30 (8), 13630-13646 (2022), https://doi.org/10.1364/OE.454553

S. Reichel, K. Blankenbach, F. Späth, V. Wohlgemuth, A. Reber, M. Rank, A. Heinrich „Improved light scattering characterization by BSDF of automotive interior and 3D printed materials”, Proceedings Volume 11693, Photonic Instrumentation Engineering VIII; 1169311 (2021) https://doi.org/10.1117/12.2578150, 2021

Oberst M, Klar T and Heinrich A, ‘The Effect of Mobile Indoor Air Cleaners on the Risk of Infection with SARS-CoV-2 in Surgical Examination and Treatment Rooms with Limited Ventilation Options”, Austin J Public Health Epidemiol. 2021; 8(1): 1094.

Oberst M., Heinrich A. „Effekt eines mobilen Raumluftfilters auf die Aerosolbelastung in chirurgischen Untersuchungsräumen vor dem Hintergrund der COVID-19-Pandemie“, Der Unfallchirurg, https://doi.org/10.1007/s00113-021-00975-y, 124, pages 362–365 (2021)

Mike Dohmen, Andreas Heinrich, “ Gradientindex Linsenherstellung Anwendung eines Multimaterial-Roboter-Dispensers“ DGaO-Proceedings 2021 – http://www.dgao-proceedings.de – ISSN: 1614-8436 – urn:nbn:de:0287-2021-A009-1, 2021

Steffen Reichel, Karlheinz Blankenbach, Andreas Reber, Andreas Heinrich, „Improved optical light scattering measurements by BSDF“, DGaO Proceedings 2021 – http://www.dgao-proceedings.de – ISSN: 1614-8436 – urn:nbn:de:0287-2021-P005-7, 2021

Murat-Jakub Ilhan, Mike Dohmen, Andreas Heinrich, „Additive Fertigung asphärischer Mikrolinsen mittels Dielektrophorese“, DGaOProceedings2021–http://www.dgao-proceedings.de–ISSN:1614-8436–urn:nbn:de:0287-2021-A010-7, 2021

Christian Eder, Andreas Heinrich, „Deep Diffractive Neural Networks - Eine Untersuchung neuer Ansätze und Evaluierung der Fourieroptik als Designmethode“, DGaO Proceedings 2021 – http://www.dgao-proceedings.de – ISSN: 1614-8436 – urn:nbn:de:0287-2021-A037-5, 2021

Manuel Rank, Andreas Heinrich, „Charakterisierung der Aushärtekinetik von fotosensitiven Harzen für den 3D-Druck optischer Komponenten“, DGaO-Proceedings 2021 – http://www.dgao-proceedings.de – ISSN: 1614-8436 – urn:nbn:de:0287-2021-A012-5, 2021

Michael Oberst, Andreas Heinrich, „Der Effekt von mobilen Luftfiltersystemen auf die Aerosolbelastung in Großraumszenarien vor dem Hintergrund des Infektionsrisikos der COVID-19-Erkrankung. Kann die Präsenzlehre wieder aufgenommen werden?“, Zentralblatt für Arbeitsmedizin, Arbeitsschutz und Ergonomie volume 71, pages 205–212, https://doi.org/10.1007/s40664-021-00435-9 (2021)

M. Merkel, A. Heinrich, A. Sigel, C. Ocker „Adaptives Spiegelelement“ Patentschrift DE 10 2019 132 796 B3 2021.04.01, 2021

V. Richter, M. Rank, A. Heinrich, H. Schneckenburger, „Novel approaches in 3D live cell microscopy“, Quantum Electronics 52 (1) 17 – 21 (2022)

J. Schanz, D. Meinhard, T. Pott, S. Nester, A.K.M. De Silva, D.K. Harrison, H. Riegel, V. Knoblauch, “Adhesively bonded hybrid Al-CFRP joints: Influence of pre-treatment, adhesive chemistry as well as corrosion and ageing processes on the mechanical properties”, 24th International Conference on Composite Structures, ICCS24, Porto, Portugal, 14-18 Juni 2021

D. Meinhard, J. Schanz, T. Pott, A.K.M. De Silva, D.K. Harrison, H. Riegel, V. Knoblauch, “Hybrid aluminum alloy and thermoplastic CFR-PA12 joints manufactured by IR-irradiation: Influence of pre-treatment and ageing on the mechanical properties” 24th International Conference on Composite Structures, ICCS24, Porto, Portugal, 14-18 Juni 2021

M. Hofele, A.K.M. De Silva, D.K. Harrison, H. Riegel, “Laser Polishing of Additive Manufactured Aluminum AlSi10Mg Laser Powder Bed Fusion Parts by Modulated Laser Radiation”, 14th International Conference on Advanced Computational Engineering and Experimenting ACEX 2021, Malta, 4-8 Juli 2021

J. Schanz, D. Meinhard, S. Nester, I. Dostal, H. Riegel, A.K.M. De Silva, D.K. Harrison, V. Knoblauch, “Laser Surface Treatment of CFRP Using Near-Infrared Laser Wavelength with Varied Primary and Secondary Process Parameters”, 14th International Conference on Advanced Computational Engineering and Experimenting ACEX 2021, Malta, 4-8 Juli 2021

D. Kolb, J. Neuer, C. Deininger, T. Matsumoto, H. Riegel, "Microstructure and Mechanical Properties of Non-Combustible AZX912 Magnesium Alloy Products Fabricated by Selective Laser Melting”, 14th International Conference on Advanced Computational Engineering and Experimenting ACEX 2021, Malta, 4-8 Juli 2021

M. Hofele, J. Neuer, M. Lindenberger-Ullrich, J. Schanz, D. K. Harrison, A. K. M. De Silva, H. Riegel, "Laser cleaning as a productive surface post-treatment method for L-PBF parts", Laser in Manufacturing (LIM), June 2021

M. Kleefoot, S. Ruck, J. Martan, J. Sandherr, M. Bolsinger, V. Knoblauch, H. Riegel, "Modeling of selective laser ablation of lithium-ion battery electrodes", Laser in Manufacturing (LIM), June 2021

F. Schaefer, S. Ruck, M. Kleefoot, W. Schulz, F.Köhn, J. Albrecht, H. Riegel, "Superhydrophobic surfaces using ultra-short pulse structuring of thin metals", Laser in Manufacturing (LIM), June 2021

S. Ruck, D. K. Harrison, A. K. M. De Silva, M. Jonathan Kleefoot, H. Riegel, "Influence of the build angle dependent surface quality on the ultra-short pulsed laser ablation of additive manufactured AlSi10Mg samples", Laser in Manufacturing (LIM), June 2021

Schanz J., Meinhard D., Dostal I., Riegel H., de Silva, A. K. M., Harrison D. K., Knoblauch V., Comprehensive study on the influence of different pretreatment methods and structural adhesives on the shear strength of hybrid CFRP/aluminum joints - The Journal of Adhesion (2021), S. 1-29, https://doi.org/10.1080/00218464.2021.1938004

Goll D., Trauter F., Bernthaler T., Schanz J., Riegel H., Schneider G., Additive Manufacturing of Bulk Nanocrystalline FeNdB Based Permanent Magnets. Micromachines 2021, 12(5), 538; https://doi.org/10.3390/mi12050538

Islam, N., Schanz J., Kolb D., Riegel H., Improvement of Surface Quality and Process Area Rate in Selective Laser Melting by Beam Oscillation Scan Technique. J. of Materi Eng and Perform (2021). https://doi.org/10.1007/s11665-021-05665-9

Hofele M., Schanz J., Roth A., De Silva A. K. M. , Harrison D.K., Riegel H., Process parameter dependencies of continuous and pulsed laser modes on surface polishing of additive manufactured aluminium AlSi10Mg parts, Materialwissenschaft und Werkstofftechnik, 52 Issue 4, (2021), DOI: 10.1002/mawe.202000335

Ruck, S., Harrison, D.K. , DeSilva, A., Kleefoot M.J., and Riegel, H., Single Track Ultra-short Pulsed Laser Ablation on Additive Manufactured Metallic Surfaces, Journal of Laser Micro/Nanoengineering, 16, (2021), 1, DOI: 10.2961/jlmn.2021.01.2007

Hofele, M., Roth, A., Schanz, J., Harrison, D.K., DeSilva, A.K.M. and Riegel, H. Laser Polishing of Laser Powder Bed Fusion AlSi10Mg Parts—Influence of Initial Surface Rough-ness on Achievable Surface Quality, Materials Sciences and Applications, 12, (2021), S.15-41, DOI: 10.4236/msa.2021.121002

A. Heinrich “Can one 3D print a laser”, Proceedings Volume 11277, Organic Photonic Materials and Devices XXII; 1127704, https://doi.org/10.1117/12.2547183, 2020

C. Eder, M. Rank, A. Heinrich, “Additive manufactured organic light-emitting diodes”, Proceedings Volume 11277, Organic Photonic Materials and Devices XXII; 1127705 https://doi.org/10.1117/12.2547232, 2020

Y. Bauckhage, A. Heinrich “Curing subpixel structures for high-resolution printing of translucent materials using standard DLP-projectors”, Proceedings Volume 11294, Emerging Digital Micromirror Device Based Systems and Applications XII; SPIE Photonics West, https://doi.org/10.1117/12.2545711, 1129408, 2020

A. Heinrich (editor) “3D Printing of Optical Components”, Springer Series in Optical Sciences, ISBN 978-3-030-58959-2 , 2020

Rui Almeida, Rainer Börret and Wolfgang Rimkus, Simulation of the elastic properties of 3D printed plastic tension rods using Fused Deposition Modeling (FDM), International Refereed Journal of Engineering and Science (IRJES), Volume 9, Issue 5 (May 2020), PP. 18-24

 Pohl M., Kukso O., Boerret R. et al. Mid-spatial frequency error generation mechanisms and prevention strategies for the grinding process. J. Eur. Opt. Soc.-Rapid Publ. 16, 19 (2020). https://doi.org/10.1186/s41476-020-00140-9

Mario Pohl, Rainer Boerret, Olga Kukso, and Rolf Rascher "Mid spatial frequency error prevention strategies for the grinding process", Proc. SPIE 11478, Seventh European Seminar on Precision Optics Manufacturing, 114780E (8 July 2020); https://doi.org/10.1117/12.2565261

Olga Kukso, Rolf Rascher, Mario Pohl, and Rainer Boerret "On the metrology and analysis of MSF error", Proc. SPIE 11478, Seventh European Seminar on Precision Optics Manufacturing, 1147809 (8 July 2020); https://doi.org/10.1117/12.2566251

Max Schneckenburger, Luis Garcia and Rainer Börret " Machine learning model for robot polishing cell", Proc. SPIE 11478, Seventh European Seminar on Precision Optics Manufacturing, 114780E (8 July 2020); https://doi.org/10.1117/12.2564633

Max Schneckenburger, Melanie Schiffner and Rainer Börret " High precision glass polishing with ketchup", Proc. SPIE 11478, Seventh European Seminar on Precision Optics Manufacturing, 114780E (8 July 2020); https://doi.org/10.1117/12.2564867

Max Schneckenburger, Markus Hofele, Simon Ruck, David Harrison, Jonas Raab and Rainer Börret " Additive manufactured injection moulds with optical quality surfaces", Euspen, Conference Paper, Seventh European Seminar on Precision Optics Manufacturing, 114780E (12 June 2020)

S. Suresh-Nair, A. Heinrich, M. Klein, S. Steenhusen, “Additive Manufacturing of Photoluminescent Optics”, Proc. 10915, Organic Photonic Materials and Devices; doi: 10.1117/12 . 2508574; 2019

M. Rank, A. Heinrich; “Measurement and use of the refractive index distribution in optical elements created by additive manufacturing”, Proc. 10930, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics; doi: 10.1117/ 12.2507262; 2019

V. Richter, S. Suresh Nair, A. Heinrich, H. Schneckenburger: „Towards 3D printed standard probes for fluorescence microscopy“, Focus in Microscopy FOM 2019, London, U.K., 2019.

A. Sigel, M. Dohmen, A. Heinrich, “ Evaluation of a 3D printed freeform reflector and lens”; ISBN: 978-1-943580-60-6 ; DOI: 10.1364/FREEFORM.2019.JW3A.3, 2019

C. Eder, M. Rank, A. Heinrich, „Additive Fertigung organischer Leuchtdioden“, Proceedings 120. DGaO Tagung, ISSN: 1614-8436–urn:nbn:de:0287-2019-B004-5; 2019

Mario Pohl, Uwe Bielke, Rainer Börret, Olga Kukso, Rolf Rascher, MSF-error prevention strategies for the grinding process, June 2019, DOI: 10.1117/12.2526581 , Conference: Sixth European Seminar on Precision Optics Manufacturing

Rui Almeida, Timon Ebert, Rainer Börret and Mario Pohl, Steel mould surface improvement by robot fluid jet polishing and robot pad polishing for polymer optic production, Conference: EOS Optical Technologies 2019, München, https://doi.org/10.1051/epjconf/201921505003,

Max Schneckenburger, Luis Garcia and Rainer Börret, Machine learning robot polishing cell, Conference: EOS Optical Technologies 2019, München, https://doi.org/10.1051/epjconf/201921505002  

Max Schneckenburger, Luis Garcia, and Rainer Boerret, Machine learning robot polishing cell, Proc. SPIE 11171, Sixth European Seminar on Precision Optics Manufacturing, 1117102 (28 June 2019);
https://doi.org/10.1117/12.2525529  

M. Bolsinger, M. Weller, S. Ruck, H. Riegel, V. Knoblauch, "Selective surface treatment by means of IR-laser – a new approach to enhance the rate capability of electrodes for Li-ion batteries", Electrochemica Acta 330 (2020), S. 135-163

J. Schanz, D. Meinhard, M. Gooßen, H. Riegel, V. Knoblauch, ´Laser-Oberflächenvorbehandlung von Leichtbauwerkstoffen zur Steigerung der Klebfestigkeit` Technologietag Leichtbau Regional, Schwäbisch Gmünd, 24. Oktober 2019

J. Schanz, D. Meinhard, M. Gooßen, H. Riegel, A. De Silva, D.K. Harrison, V. Knoblauch, ‘Near-infrared Laser Pretreatment of Carbon Fiber Reinforced Plastic for Adhesive Bonding’, Presentation and Poster at the 5th International Composites Conference, Stuttgart, Germany, 10.-12. September 2019

D. Meinhard, J. Schanz, H. Riegel, A. De Silva, D.K. Harrison, V. Knoblauch, ‘Adhesive Joining Processes - Influence of Process Control, Material Selection and Aging on the Mechanical Performance of Hybrid Multi-Material Systems’, Presentation and Poster at the 5th International Composites Conference, Stuttgart, Germany, 10.-12. September 2019

D. Hohs, F. Trauter, U. Pflanz, J. Schurr, T. Bernthaler, J. Schanz, H. Riegel, D. Goll, G. Schneider, „Ultrafeine Mikrostrukturen durch selektives Laserschmelzen von Fe-Nd-B“ 52. Materialographie Tagung, Dresden, 19.09.2019

S. Ruck, S. Enderle, M.Bolsinger, M. Weller, V. Knoblauch, H. Riegel, "Enhancing the rate capability of highly densified Li-Ion battery cathodes by selective laser ablation", Proc. SPIE 10906, Laserbased Micro- and Nanoprocessing XIII, 109061D (4 March 2019); doi: 10.1117/12.2510073 

T. Schubert, J. Schurr, D. Kolb, S. Ruck, M. Hofele, T.Bernthaler, H.Riegel, G.Schneider, "Individual material and process development in laser based additive manufacturing", Proc. SPIE 10909, Laser 3D Manufacturing VI, 109090G (4 March 2019); doi: 10.1117/12.2508241SPIE  

M. Braun, M. Hofele, J. Schanz, S. Ruck, M. Pohl, R. Börret, H. Riegel, "Time-based offline track planning of robot guided laser applications for complex 3D freeform surfaces," Proc. SPIE 10909, Laser 3D Manufacturing VI, 109090V (4 March 2019); doi: 10.1117/12.2508340

M. Hofele, D. Kolb, S. Ruck, H. Riegel: „High-Speed-Thermografie beim Laserlöten“, Laser, Ausgabe 2, 2019, S. 24-26

L. Abele, A.K. Jäger, W. Schulz, S. Ruck, H. Riegel, T. Sörgel, J. Albrecht: „Superoleophobic surfaces via functionalization of electrophoretic deposited SiO2 spheres on smart aluminum substrates”, Appl. Surf. Sci., Vol. 490, 2019, Pages 56-60, https://doi.org/10.1016/j.apsusc.2019.06.046

D. Goll, D. Schuller, G. Martinek, T.Kunert, J. Schurr, C. Sinz, T. Schubert, T.Bernthaler, H.Riegel, G. Schneider: "Additive manufacturing of soft magnetic materials and components", ADDMA, Vol. 27, 2019, Pages 428 - 439, https://doi.org/10.1016/j.addma.2019.02.021 

A. Heinrich, “Potential und Grenzen additiv gefertigter Optik”, Jahrbuch Optik und Feinmechanik 2017, vol. 63, St. 79-93, ISBN 978-3-00-58978-2, Optik Verlag Görlitz, 2018

S. Suresh Nair, J. Nuding, A. Heinrich, “3D-printed optical active components“, Proc. SPIE 10529, Organic Photonic Materials and Devices XX; doi: 10.1117/12.2287427; 2018

A. Heinrich, R. Börret, M. Merkel, H. Riegel, “Additive manufacturing of reflective and transmissive optics - potential and new solutions for optical systems”, Proc. 10523, Laser 3D Manufacturing V; doi: 10.1117/12.2293130; 2018

M. Rank, A. Heinrich, “3D Printing of Optics”, Spotlight vol. SL39, http://dx.doi.org/10.1117/3.2324763; ISBN: 9781510619982, SPIE Press, 2018

A. Sigel, A. Heinrich, „Ein Source-Target-Mapping Ansatz durch inverses Raytracing zur Berechnung von reflektiven Freiformoptiken“, Proceedings 119. DGaO Tagung, ISSN: 1614-8436, urn:nbn:de 0287-2018-P015-8; 2018

Y. Bauckhage, A. Heinrich, „Optimierung der Oberflächengüte additiv gefertigter transmittierender Optiken mittels Dip-Coating“, Proceedings 119. DGaO Tagung, ISSN: 1614-8436, urn:nbn:de 0287-2018-P053-6; 2018

M. Rank, M. Wagner, H. Schneckenburger, A. Heinrich, „Additiv gefertigte monolithische Lichtscheibenbeleuchtungseinheit zur Beleuchtung aus mehreren Richtungen“, Proceedings 119. DGaO Tagung, ISSN: 1614-8436, urn:nbn:de 0287-2018-P052-2; 2018

M. Rank, A. Heinrich, „Additive Fertigung einer Linse mit Gradient im Brechungsindex“, Proceedings 119. DGaO Tagung, ISSN: 1614-8436, urn:nbn:de 0287-2018-A006-0; 2018

S. Suresh-Nair, A. Heinrich, M. Klein, J. Nuding, „Additive Manufacturing of Functional (Photoluminescent) Optical Components”, Proceedings 119. DGaO Tagung, ISSN: 1614-8436, urn:nbn:de 0287-2018-A005-6; 2018

A. Heinrich, M. Rank, A. Sigel, Y. Bauckhage, S. Suresh-Nair, „Additive Fertigung von reflektiven und transparenten Optiken - Potential und neue Lösungsmögl ichkeiten für optische Systeme“, Proceedings 119. DGaO Tagung, ISSN: 1614-8436, urn:nbn:de 0287-2018-H001-2; 2018

A. Heinrich „Proceedings of the 119. Jahrestagung der Deutschen Gesellschaft für angewandte Optik“, 2018

J. Schanz, I. Dostal, D. Meinhard, V. Reitz, S. Ruck, R. Riegel, V. Knoblauch: „Beurteilung der Laservorbehandlung auf Oberflächen- und Festigkeitseigenschaften hybrider CFK/Al Verbindungen.“ 119. Jahrestagung der deutschen Gesellschaft für angewandte Optik e. V. (DGaO), Aalen, 2018

J. Schanz, M. Hofele, S. Ruck, H. Riegel: „Prozessfenster und -strategien beim Laserstrahlpolieren von additiv gefertigten Metalloberflächen.“ 119. Jahrestagung der deutschen Gesellschaft für angewandte Optik e. V. (DGaO), Aalen, 2018

D. Schuller, T. Kunert, J. Schurr, T. Schubert, C. Sinz, T. Bernthaler, H. Riegel, M. Merkel, D. Goll, G. Schneider, Realization of novel soft magnetic structures and components by additive manufacturing, 8th INTERNATIONAL CONFERENCE ON MAGNETISM AND METALLURGY, Dresden 2018

J. Neuer, Y. Tiryaki, M. Hofele, B. Burzic H. Riegel: „Laserstrahlschweißen von S235JR im Unterdruck“ Proceeding, 119. Jahrestagung der deutschen Gesellschaft für angewandte Optik e. V. (DGaO), Aalen, 2018

Rui Almeida, Rainer Börret, Mario Pohl, David K. Harrison & Anjali K. M.De Silva, „Geometrical shape improvement of steel moulds by robot polishing process for polymer optic replication“, Production & Manufacturing Research, Vol. 6, Issue 1, Pages 247-263, DOI:10.1080/21693277.2018.1509743; 2018

Mario Pohl, Rainer Börret, Olga Kukso, Rolf Rascher, Simulation of MSF errors using Fourier transform, August 2018, DOI: 10.1117/12.2317484, Conference: Fifth European Seminar on Precision Optics Manufacturing

Mario Pohl, Rainer Börret, Olga Kukso, Rolf Rascher, On the metrology of the MSF errors, August 2018, DOI: 10.1117/12.2318675, Conference: Fifth European Seminar on Precision Optics Manufacturing

Mario Pohl, Rainer Börret, Olga Kukso, Rolf Rascher, On the metrology of MSF errors after grinding, September 2018, DOI: 10.1117/12.2321007, Conference: Optical Manufacturing and Testing XII

Mario Pohl, Uwe Bielke, Rainer Börret, Olga Kukso, Rolf Rascher, Simulation of MSF-errors using Fourier transformation, September 2018, DOI: 10.1117/12.2320214 ,Conference: Optical Manufacturing and Testing XII

A. Heinrich, „Methoden der optischen Messtechnik“, Buchartikel in “Optik für Ingenieure und Naturwissenschaftler - Grundlagen und Anwendungen”; Herausgeber: E. Hering, ISBN: 978-3-446-44281-8, Hansa Fachbuch; 2017

K. Schlichting, T. Novak, A. Heinrich. „Additive Manufacturing of Tunable Lenses”, Proc. SPIE 10101, Photonics West 2017: Organic Photonic Materials and Devices XIX, 1010116, doi: 10.1117/12.2252353; 2017

A. Heinrich, M. Rank, S. Suresh Nair, Y. Bauckhage, P. Maillard, “Additive manufacturing: a new approach to realize complex and unconventional optical components”, Proc. SPIE 10101, Organic Photonic Materials and Devices XIX, 1010118; doi: 10.1117/12.2250367; 2017

M. Rank, S. Pekrul, A. Horsak, Y. Bauckhage, A. Heinrich, „Diffractive Effects of 3D printed optical elements”, Proceedings 118. DGaO Tagung, ISSN: 1614-8436, urn:nbn:de 0287-2017-B008-9; 2017

T. Novak, K. Schlichting, A. Heinrich, „Additive Fertigung und Analyse von Flüssiglinsen“, Proceedings 118. DGaO Tagung, ISSN: 1614-8436, urn:nbn:de 0287-2017-B007-5; 2017

T. Tischler, A. Varnay, A. Heinrich, „Additive Fertigung und Analyse der Eigenschaften von Elastomeroptiken“, Proceedings 118. DGaO Tagung, ISSN: 1614-8436, urn:nbn:de 0287-2017-P034-8; 2017

A. Heinrich, „Additive Fertigung von optischen Komponenten“, Proceedings 14th Rapid.Tech conference, pp. 160-167; 2017

A. Sigel, P. Maillard, M. Rank, A. Heinrich, „Individualisierte optische Messtechnik basierend auf additiv gefertigten optischen Komponenten“, tm – technisches Messen, vol. 84 (7-8), pp. 512-524; 2017

A. Sigel, M. Merkel, A. Heinrich, „Miniaturization of an optical 3D sensor by additive manufacture of metallic mirrors”, Proc. SPIE 10329, Optical Measurement Systems for Industrial Inspection X, 103290Q; doi:10.1117/12.2269801; 2017

E. Stübling, Y. Bauckhage, E. Jelli, B. Globisch, M. Schell, A. Heinrich, J. C. Balzer, and M. Koch, “A THz Tomography System for Arbitrarily Shaped Samples”, Journal of Infrared, Millimeter, and Terahertz Waves, vol. 38, pp. 1179–1182; 2017

M. Rank, A. Horsak, A. Heinrich, “Simple scattering analysis and simulation of optical components created by additive manufacturing”, Proc. SPIE 10448, Optifab, 104480N; doi: 10.1117/12.2279781, 2017

B. Burzic, M. Hofele, S. Mürdter, H. Riegel, Laser polishing of ground aluminum surfaces with high energy cw - laser, Journal of Laser Applications, Laser Intstitute of America, 2017, Vol.29, Issue 1,DOI: 10.2351/1.4966923

J. Schanz, M. Hofele, S. Ruck, T. Schubert, L. Hitzler, G. Schneider, M. Merkel, H. Riegel, Metallurgical Investigations of Laser Remelted Additively Manufactured AlSi10Mg Parts, Mat.-wiss. u. Werkstofftech. 48, No. 5, 2017,

J. Schanz, J. Neuer, S. Ruck, H. Riegel, Smooth Weld-Seams by use of Structured Surface in Key-Hole-Welding, Konferenzbeitrag European Automotive Laser Applications, Automotive Circle Conference, Bad Nauheim, 14.-15. Februar 2017

D. Meinhard, V. Reitz, S. Ruck, H. Riegel, V. Knoblauch, Vergleich von IR- und UV-laserbasierten Vorbehandlungsmethoden zur Festigkeitssteigerung hybrider CFK/Al Verbindungen, Leichtbau BW, 4. Technologietag Hybrider Leichtbau, Stuttgart, 30.-31. Mai 2017

V. Reitz, D. Meinhard, S.Ruck, H. Riegel,V. Knoblauch, A comparison of IR- and UV-laser pretreatment to increase the bonding strength of adhesively joined aluminum/CFRP components, Composites Part A: Applied Science and Manufacturing, Volume 96, May 2017, Pages 18–27, DOI: 10.1016/j.compositesa.2017.02.014

M. Schweizer, D. Meinhard, S. Ruck, H. Riegel, V. Knoblauch, Adhesive bonding of CFRP: a comparison of different surface pre-treatment strategies and their effect on the bonding shear strength, Journal of Adhesion Science and Technology, April 2017, DOI: 10.1080/01694243.2017.1310695

M. Hofele, J.Schanz, B. Burzic, S. Lutz, M. Merkel, H. Riegel, Laser based post processing of additive manufactured metal parts, Laser in Manufacturing Conference (LIM), München, 2017

V.Reitz, D.Meinhard, S.Ruck, V. Knoblauch, H. Riegel, A comparison of IR- and UV-laser pretreatment to increase the bonding strength of adhesively joined Aluminum/CFRP components, Laser in Manufacturing Conference (LIM), München, 2017

M. Hofele, J.Schanz, S.Ruck, T.Schubert, G.Schneider, M. Merkel, H. Riegel, Metallurgical investigation of laser based post processing of additive manufactured aluminum parts, DGM Metallographie Tagung

Aalen, 2017H. Riegel, E. Hering, Laser in der Materialbearbeitung, S. 450-470 in Optik für Ingenieure und Naturwissenschaftler – Grundlagen und Anwendungen von E. Hering, R. Martin (Hrsg.), Hanser Verlag, München, 2017

Almeida, R; Börret, R.; Rimkus, W.; Harrison, D.K.; Desilva, A.: “FEM simulation of the material removal in pad polishing”, Proc. SPIE 10326, Fourth European Seminar on Precision Optics Manufacturing, 1032607, (15 June 2017)

Almeida, R; Börret, R.; Rimkus, W.; Harrison, D.K.; Desilva, A.: “Material removal simulation for steel mould polishing”, Production & Manufacturing Research, 5:1, 236-250, ISSN 2169-3277: 2017

D. Sydes, P.A. Kler, P. Zipfl, D. Lutz, H. Bouwes, C. Huhn, On-chip intermediate potential measurements for the control of electromigration in multi-channel networks in case of time-dependent potential changes, Sensors and Actuators B. Chemical, 240, pp. 330-337, 2017

A. Sigel, M. Rank, P. Maillard, Y. Bauckhage, S. Pekrul, M. Merkel, A. Heinrich “Individualized optical metrology for in-line applications based on additive manufacturing“, Forum Bildverarbeitung, Karlsruhe, Conference Proceedings, pp. 25-36; 2016

Almeida, R.; Börret, R.; Rimkus, W.; Harrison, D.K.; Desilva, A.K.M.: “Polishing Material Removal Correlation on PMMA – FEM Simulation”, in: Journal of the European Optical Society – Rapid publications Vol 11/2016, ISSN 1990-2573, (2016) [peer reviewed]

Pohl, M.; Börret, R.: “Simulation of mid-spatials from the grinding process”, Journal of the European Optical Society - Rapid publications, Vol 11 (2016), ISSN 1990-2573 [peer reviewed]

A. Heinrich, M. Rank, P. Maillard, A. Suckow, Y. Bauckhage, P. Rößler, J. Lang, F. Shariff and S. Pekrul; "Additive manufacturing of optical components" Advanced Optical Technologies vol. 5(4), pp. 293-301; 2016

Heinrich A., Bauckhage Y., „3D printed light pipes for advanced illumination”, DGAO Tagung, 2016, Hannover

Suckow A., Shariff F., Pekrul S., Heinrich A., „Additive Manufacturing – Design and Fabrication of Fisheye Objectives”, DGaO Tagung, 2016, Hannover

A.King, G. Ketzer-Raichle, A.Kopp, T.Grubesa, M.Hofele, G.Schneider, E.Kalhöfer, H. Riegel, Laserhärten von C45E aus werkstoffkundlicher Sichtweise, Jahrbuch der Oberflächentechnik 2016, Leuze Verlag, Bad Saulgau, 2016

J. Schanz, M. Hofele, l. Hitzler, M. Merkel, H. Riegel, Laser polishing of additive manufactured AlSi10Mg parts with an oscillating laser beam, Machining, Joining and Modifications of Advanced Materials, Advanced Structured Materials 61, Springer, Singapore 2016, DOI: 10.1007/978-981-10-1082-8

D. Sydes, P.A. Kler, H. Meyer, P. Zipfl, D. Lutz, C. Huhn, On-chip intermediate LED-IF-based detection for the control of electromigration in multi-channel networks, Analytical and Bioanalytical Chemistry 408, pp. 8713-8725, 2016

Speich, M.: ”The Development of Robotic Polishing for Steel Moulds”, Dissertation, University of Glasgow

Börret R.; Kelm A.; Raab R.; Speich M.: „Automated fabrication of freeform lens prototypes for LED applications“, in: EOSMTOC Conference 22. June – 24. June 2015, Munich (2015)

Almeida, R.; Börret, R.; Rimkus, W.; Harrison, D.; DeSilva, A.: Poster: „Polishing Material Removal Correlation of PMMA – FEM Simulation“, EOSMTOC Conference 22. Juni – 24. Juni 2015, München (2015)

Pohl, M.; Börret, R.: Poster: „Simulation of mid-spatials from the grinding process“, EOSMTOC Conference 22. Juni – 24. Juni 2015, München (2015)

Weimann C., Wolf S., Meier D, Schleitzer Y., Totzeck M., Heinrich A., Höller F., Freude W., Koos C., Fast high-precision distance measurement with electro-optic frequency combs, DGaO Tagung 2015, Brno, Tschechien

Heinrich A., Sorg B., Grzesiak A., Berger U, „ An optical bore hole sensor based on additive manufacturing”, DGAO Tagung, 2015, Brno, Tschechien

Heinrich A., Maillard P., Suckow A., Grzesiak A., Sorg B., Berger U., „ Additive Manufacturing – a new approach for individualized optical shape metrology”, Proc. SPIE 9525, Optical Measurement Systems for Industrial Inspection IX, 95251T; doi:10.1117/12.2183168; 2015

Maillard P., Heinrich A., „3D printed Free Form Optical Sensors for Metrology Application”, Proc. SPIE 9628, Optical Systems Design 2015: Optical Fabrication, Testing, and Metrology V, 96281J; doi: 10.1117/12.2191280; 2015

Kölmel A., Bareis J., Stefan L., Heinrich A., Lanza G., „Detektion von Lufteinschlüssen bei der Kleberaupenapplikation“, tm - Technisches Messen. Band 82, Heft 11, pp. 585–594; 2015

M. Herden, T. Sube, H. Riegel, T. Sörgel, B. Hader und J. Albrecht, Mehrkomponentige Metalloberflächen mit Strukturen auf Mikrometermaßstab, Seite 96- Jahrbuch Oberflächentechnik 2015, Leuze-Verlag, Bad Saulgau, 2015 (ISBN 978-3-87480-292-5)

C. Weiß, G. Ketzer-Raichle, M. Hofele, E. Reiter, G. Schneider, W. Kleppmann, H. Riegel, Laserpolieren von Vergütungsstahl mit Linienoptik, Seite 96, Jahrbuch Oberflächentechnik 2015, Leuze-Verlag, Bad Saulgau, 2015 (ISBN 978-3-87480-292-5)

J. Schmidt, R. Scholz, H. Riegel, Laserpolishing of aluminum by remelting with high energy pulses, Mat.-wiss. u. Werkstofftech. 46, No.6 2015 (DOI 10.1002/mawe.201500318)

Schillig, R., Stock, T., Schmeiler, M., Riegel, H. & Müller, E., 2015. Energieeffizienz von Laserbearbeitungsprozessen. Laser – Entwicklung und industrielle Anwendung. Heft Nr. 4, 29. Jahrg., Nov./Dez. 2015, b-Quadrat Verlag

Stein, S.; Boerret R.; Kelm, A.; Reiter, E.; Schneider G.: Riegel, H. „Hardening and Roughness Reduction of Carbon Steel by Laser Polishing“, in: Öchsner, A., Altenbach, H, (eds): “Design and Computation of Modern Engineering Materials”, Advanced Structured Materials 54, Springer, ISBN 978-3319073828, S. 411-419 (2014)

Boerret, R.; Wiedemann, D.; Kelm, A.: „Detection of subsurface damage in optical transparent materials using short coherence tomography“, in: 58th Ilmenau Scientific Colloquium, Ilmenau [peer reviewed] (2014)

Boerret, R.; Raab J.; Speich, M.: „Mold production for polymer optics“, in: Proc. SPIE 9192 “Current Developments in Lens Design and Optical Engineering XV” (2014)

Schneider, R.; Grant, R.; Heine, B.; Börret, R.; Burger, S.; Zouaoui, Z.: „An analysis of the surface quality of AA5182 at different testing“, in: Materials and Design 64(2014), pp750-754, ISSN 0261-3069

Weimann C., Wolf S., Meier D., Schleitzer Y., Totzeck M., Heinrich A., Hoeller F., Freude W, Koos C. „Fast high-precision distance measurements with electro-optic frequency combs”, DGaO Tagung 2014

H. Riegel, M. Merkel, A. Öchsner, Laser beam drilling of metal-based composites, in High-Power Laser Materials Processing, Proc. of SPIE Vol. 8963 (2014), 7 pages

H. Riegel, M. Merkel, A. Öchsner, Laser drilling of hollow sphere structures, Mat.-wiss. u. Werkstofftech. 43, No. 5 (2014) pages 406-413, DOI 10.1002/mawe.201400239, ISSN: 0933-5137

H. Riegel, S. Stein, R. Börret, A. Kelm, E. Reiter, G. Schneider, Hardening and Roughness Reduction of Carbon Steel by Laser Polishing in Design and Computation of Modern Engineering Materials, Advanced Structured Materials 54, Springer, Berlin (2014), pages 411-419, DOI: 10.1007/978-3-319-07383-5_29

Speck, A.; Zelzer, B.; Speich, M.; Börret, R.; Langenbucher, A.; Eppig, T. (2013): "Deflectometric analysis of high volume injection molds for production of occupational eye wear", in: Zeitschrift für Medizinische Physik, 2013. Vol. 23(4): pp. 314-323. ISSN 0939-3889 [peer reviewed]

Boerret, R.: “Aktive Laseroptik aus technischer Keramik”, in: Photonics BW Newsletter inFocus 2013/2014, Oberkochen (2013)

Wiedemann, D.; Börret, R.: „Subsurface Damage Measurement”, in: Proceedings of 3rd EOS Conference on Manufacturing of Optical Components (EOSMOC 2013), 2013, München

Speich, M.; Börret, R.; Harrison, D.K.; DeSilva, A.: "Robot polishing of metal materials for the optical industries". In: Conference on Manufacturing of Optical Components 2013. Munich: European Optical Society. ISBN 978-3-98150-227-5. (2013)

Börret, R.; Speich, M.; Mazal, J.; Kelm, A.; Wiedemann, D.: "Polieren als Endbearbeitungsprozess - von der keramischen Laseroptik bis zum Optikelement aus Kunststoff | Polishing as finishing process - from ceramic laser optics to polymer optics", in: Forschungstag 2013, Hochtechnologieforschung. Stuttgart: Baden-Württemberg Stiftung (Research day 2013, High-tech research, Stuttgart, Baden-Württemberg foundation). (2013)

Speich, M.; Börret, R.; DeSilva, A.K.M.; Harrison, D.K.; Rimkus, W.: "Precision Mold Manufacturing for Polymer Optics". In: Materials and Manufacturing Processes, 2013. 28(5): pp. 529-533. ISSN 1042-6914 / 1532-2475 [peer reviewed] (2013)

Mazal, J.; Börret, R.: “High pressure fluid jet polishing of advanced materials”, in: Proceedings of 3rd EOS Conference on Manufacturing of Optical Components (EOSMOC 2013), München (2013)

Vogt C.; Rascher, R.; Mazal, J.; Börret, R.; Lohner, R.-D., Tawakoli, T.: „The cause of structures on ground shapes“, in: Proceedings of 3rd EOS Conference on Manufacturing of Optical Components (EOSMOC 2013), München (2013)

Tawakoli, T.; Lohner, R.-D.; Kitzig, H.; Börret, R.; Mazal, J.: Rascher, R., C. Vogt, „Basic studies on ultrasonic assisted grinding and the application of fluid jet polishing for difficult to cut materials“, in: InterTech 2013, Baltimore, USA

M. Araújo, M. Merkel, H. Riegel, A. Öchsner, On the numerical simulation of laser beam cutting of hollow sphere structures, Mat.-wiss. u. Werkstofftech. 44, No. 5 (2013)

H. Riegel, M. Merkel, Cutting of Metallic Hollow Sphere Structures, Vortrag Stuttgarter-Laser-Tage (2013)

H. Riegel, J. Fruhstuck, M. Merkel, R. Winkler, A. Öchsner, On the Laser Beam Cutting of Metallic Hollow Sphere Structures, in High-Power Laser Materials Processing, Proc. of SPIE Vol. 8603 86030V-1 (2013)

H. Riegel, M. Merkel, A. Öchsner, M. Araújo , R. Thiede, J. Fruhstuck, Laser beam welded sandwich structures with hollow sphere core, Mat.-wiss. u. Werkstofftech. 44, No. 5 (2013)

A. Bäuerle, M. Merkel, H. Riegel, A. Öchsner, Numerical Simulation of Laser Drilling of Hollow Sphere Structures, Conference ACE-X2013, Madrid, Book of Abstracts, 63 (2013) page 64

H. Riegel, M. Merkel, Lasermaterialbearbeitung von Verbundwerkstoffen am Beispiel metallischer Hohlkugelstrukturen, Photonik, 50, 6, (2013) Page 50-53, ISSN 1432-9778

Robot assisted steel polishing and surface characterization

M. Speich, L. Baath, R. Börret, D. Harrison, B.-G. Rosén
P6.46., in Proceedings of the 12th euspen International Conference, Vol. 2, Stockholm, Sweden, June 4–8, 2012, euspen: Bedford, UK, 2012, pp 205-208.


Precision mould manufacturing for polymer optics

M. Speich, R. Börret, A. DeSilva, D. Harrison
Proceedings of the 37th Matador Conference (Matador 2012), 25th-27th July 2012, Manchester, UK, pp.XX-YY. 2012


Precision Mold Manufacturing for Polymer Optics. Materials and Manufacturing Processes.

M. Speich, R. Börret, A. DeSilva, D. Harrison, W. Rimkus
Taylor & Francis, (2012)


“Robot assisted fluid jet polishing of advanced materials”

J. Mazal, R. Börret, M. Krenz, M. Speich
P6.28. In Proceedings of the 12th euspen International Conference, Vol. 2, Stockholm, Sweden, June 4–8, 2012, euspen: Bedford, UK, 2012, pp 153-156.


LED-OASYS - manufacturing of prototypes for illumination optics using an industrial robot

A. Kelm, R. Boerret
DGaO-Proceedings 2012 – Erlangen-Nürnberg: Dt. Gesellschaft für angewandte Optik, ISSN: 1614-8436 (2012)


Material removal in polishing processes - finite element simulation and experiment

M. Speich, R., Börret, W., Rimkus, D. Harrison
Proceedings of the 10th International Conference on Manufacturing Research (ICMR2012), ISBN 9781905866601 , Volume 2, pages 529-534


Materialabtrag beim Polieren - Finite Elemente Simulation und Versuch

M. Speich, R., Börret, W., Rimkus, D. Harrison
LS-DYNA Forum 2012, Oktober 2012, Ulm


Improving the polishing accuracy by determining the variance of the friction coefficient

A. Kelm, R. Börret, S. Sinzinger
Journal of the European Optical Society – Rapid publications Vol 7/2012, ISSN 1990-2573, (2012)

Laser beam cutting of metallic hollow sphere structures

H. Riegel, M. Merkel, A. Öchsner, , Mat.-wiss. u. Werkstofftech. 43, No. 5 (2012)

Mould fabrication for polymer optics 

M. Speich, R. Börret
J. Europ. Opt. Soc. Rap. Public. 11050 Vol 6 (2011)
 
 
Variation des Prestonkoeffizienten in Abhängigkeit der Relativgeschwindigkeit im Polierprozess 

A. Kelm, R. Boerret, S. Sinzinger
DGaO-Proceedings 2011 – Erlangen-Nürnberg: Dt. Gesellschaft für angewandte Optik, ISSN: 1614-8436 (2011)
 
 
New process chain for manufacturing steel moulds 

M. Speich, R. Börret, D. Harrison, A. DeSilva
Proceedings of the 9th International Conference on Manufacturing Research ICMR 2011, Glasgow Caledonian University, Glasgow Sep 2011, pp 139-144.
 
 
Differentiation of influences in deterministic polishing 

A. Kelm, R. Boerret, S. Sinzinger
EOSMOC 2011, ISBN 978-3-00-033713-0, (2011)
 
 

Simulation and fabrication of active laser mirrors 

M. Knopf, M. Haenle, R. Boerret, A. Kelm
J. Europ. Opt. Soc. Rap. Public. 10005 Vol 5 (2010)
 
 
Sub surface damage measurements based on short coherent interferometry 

M. Sergeeva, K. Khrenikov, T. Hellmuth, R. Boerret
J. Europ. Opt. Soc. Rap. Public. 10003 Vol 5 (2010)
 
 
Cost optimized fabrication of Micro-Optical Couplers 

F. Merchán, K.-H. Brenner, R. Börret, U. Berger
Optical Fabrication and Testing (OF&T), OSA, 13th-16 th June 2010, Jackson Hole, Wyoming, USA
 

Energiestoffwechsel von Tumorzellen und Bioreagenzien auf der Spur 

H. Schneckenburger, R. Börret, C. Braxmaier, R. Kessler, P. Kioschis, D. Kühlke, U. Mescheder, W. Schröder, C. Nachtigall
BioPhotonik 2 (2009) 26-28
 
 
Simulation and analysis of the polishing process for aspheres 

A.Kelm,  M. Hänle,  R. Boerret,  S. Sinzinger
SPIE Proceedings, Vol. 7426: Optical Manufacturing and Testing VIII, 2009
 
 
4 D Metrology of grinded surfaces based on short coherent interferometry 

M. Sergeeva, K. Khrenikov, T. Hellmuth, R. Boerret
DGaO-Proceedings. - Erlangen-Nürnberg : Dt. Gesellschaft für angewandte Optik, ISSN 1614-8436. - Bd. 110 (2009)
 
 
Analysis of polishing errors from subaperture tools 

A. Kelm, R. Boerret, S. Sinzinger
DGaO-Proceedings. - Erlangen-Nürnberg : Dt. Gesellschaft für angewandte Optik, ISSN 1614-8436. - Bd. 110 (2009)
 
 
Optical performance of heated laser mirrors for high power lasers 

M. Knopf, M. Haenle, A. Kelm, S. Sinzinger, R. Boerret
Dt. Gesellschaft für angewandte Optik, ISSN 1614-8436 – Bd. 110 (2009)
 

Minimized process chain for polymer optics 

R. Boerret, J. Klingenmaier, U. Berger, et al.
Proceedings of SPIE Vol. 7061, 706118 (2008).
 
 
ASPHERO5 – simulation and analysis of the aspherical polishing process 

R. Boerret, A. Kelm, H. Thiess, V. Giggel
Key Engineering MaterialsVols. 364-366 , March 2008
 
 
Modeling of the polishing process for aspheric optics 

A. Kelm  R. Boerret, S. Sinzinger
Proc. SPIE Vol. 7102, 71020H (Sep. 25, 2008)
 

High-speed form preserving polishing of precision aspheres 

R. Boerret, A. Kelm, H. Thiess
Proceedings of SPIE Vol. 6671, 667113 (2007)
 
 
3-dimensional Scanning of Grinded Optical Surfaces Based on Optical Coherence Tomography 

R. Boerret, T. Hellmuth, K. Khrenikov
Proc. Of SPIE Vol.6671 SPIE “Optics and photonics”, San Diego 2007
 

ASPHERO5: Using advanced tactile surface analysis for economic fabrication of precision optics 

H. Thiess, V. Giggel, R. Börret, U. Birnbaum, M. Haag-Pichl
in Frontiers in Optics, Laser Science, Optical Fabrication and Testing and Organic Photonics and Electronics 2006 Optical Society of America, Washington, DC, (2006)
 
 
ASPHERO5-Fabrication of high precision aspheres –Simulation, test and analysis of the polishing process 

R. Börret
UPOP Workshop, Braunschweig (2006)
 

Variable phaseplates for focus invariant optical systems 

T. Hellmuth, A. Bich, R. Börret, A. Holschbach, A. Kelm
Proceedings of SPIE Vol. 5962, 596215 (2005)
 
 
ASPHERO5 - rapid fabrication of precise aspheres 

R. Boerret, V. Giggel, H. Wang
Proceedings of SPIE Vol. 5965, 59650I (2005)
 
 
Research on fabrication of aspheres at the Center of Optics Technology (University of Applied Science in Aalen) 

R. Boerret, J. Burger, A. Bich, et al.
Proceedings of SPIE Vol. TD03, pp. 20-23 (2005)
 
 
Development of an automatic adjustment process for a commercially available interferometer 

R. Boerret, J. Burger, R. Krumpen
DGAO Procceedings 2005