Institute of Polymer Science and Processing (iPSP)

Frick, A.; Frick, W.; Novak, G.: On the assessment of the residual service life of fiber ropes in use, Proceedings of the OIPEEC Conference 2019 – Exploring Opportunities – Synthetic/Steel, Editor: M.A.R. Dohm, ODN 0963, p.35-49, ISBN-13: 978-1-7336004-0-8

Frick, A.; Spadaro, M: Mold design for an assembly injection molded hard-soft component with integrated dynamic seal, Polymer Engineering and Science, 2018, 58(4), DOI: 10.1002/pen.24766.

Frick, A.; Spadaro, M.: Injection molded aluminum-polymer-composites – Integral lightweight structures with potential, Key Engineering Materials, 2017, 742, 381-388, DOI: 10.4028/www.scientific.net/KEM.742.381.

Frick, A.; Boßler, R.; Muralidharan, V.: Abschätzung der Reibung von Dichtungswerkstoffen aus DMA-Masterkurven, In: K.-F. Berger, S. Kiefer, Hrsg., Dichtungstechnik Jahrbuch 2018, 2017, Mannheim: Isgatec, 457-469, ISBN: 978-3-946260-02-8.

Frick, A.; Holzinger, S; Spadaro, M.: Stoffschlüssige Aluminium-Kunststoff-Hybridteile, Plastverarbeiter, 2017, 62 (8), 24-27, ISSN: 0032-1338.

Frick, A; Spadaro, M: Nachbearbeitungsfreies Herstellen einer dynamischen Dichtung durch Spritzgießen und deren Qualifikation, In: K.-F. Berger, S. Kiefer, Hrsg., Dichtungstechnik Jahrbuch 2017, 2016, Mannheim: Isgatec, 256-266, ISBN: 978-3-946260-00-4.

Spadaro, M.; Frick, A.: Leichtbau durch intrinsische Hybridisierung – Effiziente Fertigung stoffschlüssiger Kunststoff-Aluminium-Verbunde, Technomer, 2017, ISBN: 978-3-939382-13-3.

Frick, A.; Muralidharan, V.: A novel tribometer to study the dynamic sliding contact behavior of polymeric sealing materials, Technomer, 2017, ISBN: 978-3-939382-13-3.

Frick, A; Borm, M; Spadaro, M.; Kaoud, N.: Manufacturing of a pump housing with integrated dynamic TPU seal by assembly injection molding, TPE magazine, Ausgabe: 02.2016, 110-114.

Frick, A.; Muralidharan, V.; Borm, M.: A novel Rotational Cone Tribometer to approach the tribological contact between polymers and a rotational shaft, Tribologie-Fachtagung, Gesellschaft für Tribologie e.V., 2016, 1 (57), Nr.35, ISBN: 978-3-9817451-1-5.

Frick, A.; Aldinger, S; Spadaro, M: Polymer aluminum hybrid structure by injection molding, In: Conference Proceedings Euro Hybrid Materials and Structures, 2016, pp.172-183, ISBN: 978-3-88355-414-3.

Frick, A.; Spadaro, M: Mold design for an assembly injection molded hard-soft component with integrated dynamic seal. In: Conference Proceedings International Conference on Polymers and Mould Innovations – PMI, 2016, pp.172-178.

Frick, A.; Muralidharan, V.: Rotational Cone Tribometer (RCT) for Approaching the Tribological Behavior of Hard and Soft Sealing Materials under Dynamic Line Contact, Macromolecular Symposia, 2018, 378(1600120), DOI: 10.1002/masy.201600120.

Frick, A; Spadaro, M.: Process influences on the materials interface of an injection molded hard-soft-component, Macromolecular Symposia, 2018, 378(1600119), DOI: 10.1002/masy.201600119.

Frick, A.; Borm, M.; Spadaro, M: Assembly injection molding of a hard component with integrated rubberlike shaft seal and investigation of its quality, Materials Science Forum, 2015, 825-826, pp. 860-867, ISSN: 1662-9752, DOI: 10.4028/www.scientific.net/MSF.825-826.860

Frick, A.; Spadaro, M.; Borm, M.: Smart material composites substitute monolithic structures, Materials Science Forum, 2015, 825-826, pp. 353-360, ISSN: 1662-9752, DOI: 10.4028/www.scientific.net/MSF.825-826.353

Frick, A.; Borm, M.; Spadaro, M; Herstellung eines Gehäuses mit integrierter, dynamischer Dichtung aus TPU mittels Montagespritzguss, In: K.-F. Berger, S. Kiefer, Hrsg. Dichtungstechnik Jahrbuch 2016, 2015, Mannheim: ISGATEC, pp.168-177, ISBN: 978-3-9811509-9-5

Frick, A.; Borm, M.; Muhalidharan, V.; Spadaro, M.; Blust, M.; Albers, A: Zum Einfluss der Morphologie auf das tribologische Verhalten von Kunststoffen, in Reibung, Schmierung und Verschleiß, Tribologie-Fachtagung, Gesellschaft für Tribologie e.V, 2015, 1 (56), Nr.14, ISBN: 978-3-9817451-0-8

Frick, A.; Kaoud, N.; Muralidharan, V.; Tomp, A.: Investigation of the effect of Fluorocarbon Elastomers additives modification using Thermal Analysis Methods, 11th int. Conf. Advances in Plastics Technology APT, 13.-15.10.2015, Sosnowiec (Poland), conference paper 43, ISBN: 978-83-63555-47-4

Frick, A.; Borm, M.; Spadaro, M.: Two-Component Injection Molding of Housings with Integrated Dynamic Seal, 11th int. Conf. Advances in Plastics Technology APT, 13.-15.10.2015, Sosnowiec (Poland), conference paper 23, ISBN: 978-83-63555-47-4

Frick, A.; Spadaro, M.: Process depending morphology and resulting physical properties of TPU, AIP Conf. Proc., 2015, 1695(1), DOI: http://dx.doi.org/10.1063/1.4937301

Frick, A., Borm, M.; „Multi-materials Composites Provide Lightweight Engineering”, KMUTNB: IJAST, 2014, 7, pp. 1-9

Frick, A.; Sich, D.; Heinrich, G.; Lehmann, D.; Gohs, U.; Stern, C.: Properties of melt processable PTFE/PEEK blends: The effect of reactive compatibilization using electron beam irradiated melt processable PTFE, J. Appl. Poly. Sci., 2013, 128(3), Article first published online: 01.08.2012, pp.1818-1827, DOI: 10.1002/APP.38337

Frick, A.; Kaoud, N.; Tomp, A.: Initial attempts to enhancing rubber seals quality and reliability, In: Gomes, J.F.S; Meguid, S.A. (ed.): Recent Advances in Integrity-Reliability-Failure, Proc. 4th International Conference on Integrity, Reliability and Failure of Mechanical Systems IRF´2013, Funchal, Portugal, pp.59-60, paper ref. 3912, ISBN: 978-972-8826-27-7

Frick, A.; Pfeilmeier, A.; Kaptur, J.: Thermo-mechanische und tribologische Eigenschaften von thermoplastischem Polyurethan (TPU), KGK 66, 2013, pp. 42-48

Frick, A.; Borm, M.; Kolodziej, J.: Neue Perspektiven: Leichte Gehäuse in Verbundbauweise mit integriertem Dichtsystem, in Dichtungstechnik Jahrbuch 2014, 2013, pp.12-19

Frick, A.; Borm, M.; Kaoud, N.; Kolodziej, J.; Neudeck, J.: Microstructure and thermomechanical properties relationship of segmented thermoplastic polyurethane (TPU), AIP Conf. Proc., 2014, 1593(1), pp. 520-525, DOI: https://doi.org/10.1063/1.4873835

Frick, A.; Kaoud, N.; Tomp, A.: Rubber materials qualification towards predictive service life testing of seals, 10th Int. Scientific Technical Conference Advances in Plastics Technology APT´13, 08.-10.10.2013, Sosnowiec (Poland), Conf. Papers: paper 57, pp.732-741, Published by: Institute for Engineering of Polymer Materials and Dyes, 87-100 Toruń (Poland), ISBN: 978-83-63555-23-8.

Frick, A.: Influence of the microstructure on thermo-mechanical properties of thermoplastic polyurethane (TPU), 10th Int. Scientific Technical Conference Advances in Plastics Technology APT´13, 08.-10.10.2013, Sosnowiec (Poland), Conf. Papers: paper 55, pp.718-724, Published by: Institute for Engineering of Polymer Materials and Dyes, 87-100 Toruń (Poland), ISBN: 978-83-63555-23-8.